SKU: 54717814364

Color Side Rear View Mirror For 1.75" UTV Roll Bar

$50.39 $55.99
Save 10%
No.2 Bestseller on chemicals-recycling.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Color Side Rear View Mirror For 1.75" UTV Roll BarDESCRIPTION Material Made of high impact aluminum, glass lens and durable clamps, the whole set of RZR side mirrors is worn and corrosion resistant, great for all weather conditions Break away Side Mirrors for Polaris RZR has a break away feature with 180 Degree adjustable angle, you need to check it or tighten the screws after installation, and you can press the glass to adjust the mirror angle, too. Customize Your Style Each mirror comes with red,

DESCRIPTION

Material

Made of high impact aluminum, glass lens and durable clamps, the whole set of RZR side mirrors is worn and corrosion resistant, great for all weather conditions

Break-away

Side Mirrors for Polaris RZR has a break-away feature with 180 Degree adjustable angle, you need to check it or tighten the screws after installation, and you can press the glass to adjust the mirror angle, too.

Customize Your Style

Each mirror comes with red, blue, orange, and black snap-on chevrons, colorful chevrons can give you more passion. 

Easy Installation

Install the clamp to the roll bar firstly, adjust the angle of the mirror arm, then attach the mirror arm to the clamp.  

SKU: B0106-01101BK-KWS

SPECIFICATION
  • Item Weight: 4.8 pounds
  • Package Dimensions: 13.27 x 6.65 x 6.57 inches

FITMENT

Compatible with Universal SXS 1.75"-2'' Round Roll Bar UTV

Compatible with All Polaris RZR 570 800 900 1000; 2020 Polaris RZR 1000 pro (Does not fit 2020 Rzr XP Pro Ultimate.)

Compatible with All Polaris Turbo S XP1000 XP4 1000 XP Turbo XP4 Turbo; 2009-2014 Mid Size Polaris Rangers (do not fit 2015 and up)

Compatible with Talon Pioneer 1000; Compatible with Can-Am Maverick X3, 2020 Commander Roll Bar Part (do not fit 2021)

Compatible with Arctic Cat Wildcat and Wildcat 4, Arctic Cat Prowler (with round roll bars)

Compatible with Al Rhinos 450 660 700, Viking, Wolverine; Compatible with Kawasaki Teryx KRX1000 Series, Mule 3000 Series、Mule 600 Series

Compatible with Most Hisun UTVs with 1.75" Roll Cage

Such As, Compatible with All Bobcat UTVs, Kymco UTV's, Bad Boy MTV; Compatible with KUBOTA RTV 500/400Ci/XG850 SIDEKICK/X900/X1120/X1140/1100C

Please Note: These UTV side mirrors are not compatible with the 2015 and up Polaris Ranger. Do not fit with the windshield. Do not fit with ATV.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 54717814364

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 58 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
N
Verified Purchase
Nc
Omaha, US
★★★★★ 4
Pretty good, take your time and install it well
Size: side table leg
Materials are pretty solid, but once assembled it’s not as sturdy as you would think it should be since the material itself was solid, i say give them a chance, everything out there that’s similar is way over priced
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
R
Verified Purchase
Roberta Mayes
Phoenix, US
★★★★★ 5
Heavy duty legs for table.
Size: side table leg
Perfect legs for a table I am having made. I have an cottonwood slice. It's heavy and needed something substantial. These are perfect.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
R
R. Moheban
Cuba, US
★★★★★ 5
Robust pipe & fittings with a beautiful, smooth black finish
Size: side table leg
This set of pipe & fittings for use as low table legs is heavy duty and aesthetically pleasing. Especially when the pieces are handled, the tactile sensation is much nicer than with plumbing steel pipe because this product is beautifully finished smooth. The black pipes are quite smooth as well as the fittings. The pieces are all also pretty robust, though the wall thicknesses are less than in pipe for pressurized water systems. Of course that makes sense as this product does not need to hold fluid pressure. In my view they got the heaviness factor of this product just right; it's not as heavy or robust as black pipe used in natural gas supplies, but still robust and pretty heavy. Assembled, this product is absolutely stiff and unyielding for a solid table that could hold a man's weight easily. The feet utilize a brilliant scheme so that each foot can be independently adjusted for an uneven floor. Thus a level table on an uneven floor is easily accomplished. The feet simply extend the effective leg length by screwing counter-clockwise. To prevent any shifting at the threads adding some pipe compound or teflon tape may be advised. Even masking or duct tape might work as the idea is to just fill any gaps where male threads meet female threads. The four flanges at the tops of the legs provide a wide, solid surface for attaching the table top, with either hidden screws underneath or you could through-bolt a glass table top (provided you have the skill to drill glass!). I think this product would look great with a glass top. Assembly is quick and easy. The hardest part is drilling holes underneath the table top to accept screws. No pipe wrenches are needed as the pieces screw together by hand to an adequate tightness. If any doubt whether they are tightened enough have a strong person with grippy gloves finish. The "X" in the center attaches to the legs with a very clever machine screw system tightened with the included hex wrench. This is presumably because if tightened simply by screwing the fittings, the point of snugness would not likely be where the "T" fittings are exactly vertical. The maker has solved this problem so that you are assured that all legs will be in the perfect vertical position once everything is tight. The setup is also nice and rigid once tightened. This is a huge benefit of steel pipe projects; they are really solid. The black finish is clearly very durable, like a powder coat. It appears that it will provide excellent protection against rust. Coverage is complete; I found no dings or scratches anywhere on any piece. Overall this is a very well-designed product for function and aesthetics. Perfect for a beautifully renovated warehouse condo where an industrial vibe is desired in a rock-solid table that won't shift around. The smoothness of the pipe is top notch. I've used lots of pipe in projects, some of it actual water pipe and some decorative pipe such as this. I've never seen better quality decorative pipe as this maker put in the effort to finish it beautifully smooth. At currently $34.99 I find the price quite reasonable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
P
Verified Purchase
patricia
Alexandria, US
★★★★★ 3
the height is only 16"
Size: coffee table leg
The height is only 16". From the description it appears to be 24" wide and 24" high.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
C
CMC20
Omaha, US
★★★★★ 4
Good DIY Pipe Legs but Powder Coat Quality Lacks
Size: side table leg, Size: side table leg
These industrial style pipe legs make building a DIY end table easy and the kit saves a trip to the hardware store. The fittings go together normally and assembly is simple. Comes individually wrapped. My main issue is the powder coating looks and feels cheap and rubs off easily. The pipes already had marks from touching each other from unboxing. If you do not mind some wear on the finish over time this is a decent purchase. The metal at the hardware store will be thicker and more durable but will cost more. I’d recommend based on ease of having a kit and it being delivered saving me a trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2025

recommand products

Dragon Inferno - Smart Games
34.19
TOMY Hide and Squeak Egg and Spoon Set
17.99
Maine Coon Cat Sleeping Angel Acrylic Keychain
19.73
Brown chihuahua Sleeping Angel Ornament Sleeping Angel Car Hanging Ornament
19.75
Go Play! Everywhere Table Tennis Set
35.99